Superb Hot rolled steel Wholesale production

Superb Hot rolled steel Wholesale production is done by our company and we deliver this product to the customer at a good price and export this product to other countries.

Reasons for popularity of Superb Hot rolled steel

Hot rolling involves rolling the steel at temperatures above the recrystallization temperature above 1700 degrees Fahrenheit. Steel above the recrystallization temperature can be molded and cooled significantly compared to colder steel, and the steel can start at much larger sizes. In addition, it produces less cold rolled steel and is usually made without stopping or delay, so there is no need to reheat the steel. During the cooling process, hot rolled steel shrinks and the size and shape of the steel is surprisingly smaller than cold rolled steel.

Features of hot rolled steel: Most hot rolled products are very thin and can be bent into small bar sizes. Hot rolled steel addition is less than or significantly more than 0.01 inch. Most hot rolled products are flexible in thin and small bar sizes. Hot rolled steel More flexible than cold rolled steel Hot rolled steel is a logical decision that tight fit should not be of special importance. There are many areas where conditions exist. Super free value is more important than accuracy. Some of the basics are in the use of hot rolled steel, pipes and tubes, truck frame doors, and railroad car parts.

An alternative method used to change the shape and physical properties of steel is cold rolling. When you hear the term “cold rolling” you may think it does not contain heat, but this is not necessarily true. Cold rolling requires the same steps as hot rolling, but at the end there is a roll-adding step. With cold rolling, the steel is heated above its recrystallization point and fed through a series of rolls identical to hot rolling steps. The difference is that cold rolling requires another rolling step performed at or near room temperature. Cold rolling is a more laborious process, although it results in stronger steel.

In factories that have a lot of production, they usually use casting products. After the casting operation, the cooling is controlled in such a way that they can enter the product into the heating rolling machine without reheating and moving. For heating for smaller productions or secondary operations, the temperature of the raw material (ingot, ingot or plate) is usually room temperature. To heat these parts to the right temperature, they can be heated in oil or gas furnaces. For plain carbon steels and low alloy steels, the temperature is usually around 1200 ° C (2200 ° F). For small diameter rods, induction furnaces can be used for heating. For more information on hot-rolled steel prices visit our site.

Wholesale production of Superb Hot rolled steel

Wholesale production of Superb Hot rolled steel is produced by our collection and exported to Asian and European countries. You can refer to our site for more information about the final price of this product and hot rolled steel grades.