Another category of ingots is slabs, which are different in appearance from other categories of ingots. Unlike bloom and billet, slabs have a rectangular cross section. Usually the thickness of this type of ingot is 230 mm and the width of iron is 1.25 meters and its length is 12 meters. In fact, slabs are used to make steel sheets. Slabs, slabs or slabs are also called. For more information about Steel ingots Wholesale production, visit our site.
How to make steel ingots in minecraft tinkers construct?
The steel production chain refers to all production stages of raw materials, intermediate products, semi-finished products and finally steel end products. Raw materials such as iron ore, intermediate products such as bars, plates, billets and flowers, intermediate products such as iron sheets and finally products such as cans, profiles, etc. Application of steel bars According to the definition of the position of steel bars in the steel chain, it can be clearly understood that the use of bars is the manufacture of semi-finished products and sometimes steel finished products.
For example, plates are used to produce plates that are a semi-finished product. Of course, there are workshops in Iran that also use billet and bloom to make sheet metal, but it is usually used to make iron sheet. They also use billets and blooms to make sections like rebar, angles, studs, beams, hashes, and rails. So, in a sense, we can say that each type of ingot has specific uses. This is the main reason for producing bars of different specifications. Types of ingots As mentioned earlier, some kind of ingot must be used to make a steel product.
Of course, we are referring here to the important problem that the products made using billets are all made by the hot rolling process. This means that the ingots, which were previously delivered to the production plant in the form of cast steel parts, are first heated in ovens to 900 degrees Celsius and prepared for the manufacture of hot-rolled profiles and products. Bars are mostly classified according to their dimensions. In addition, different products can be made from each of the bars. If a number is mentioned after Ct, this number refers to the steel category in relation to the chemical composition.
For example, the first grade mentioned for steel bars is Ct0, the carbon content of which, according to the table, does not exceed 0.23%. Regarding the letters we see after the sentence Ct, it says: The letter Г indicates the percentage of manganese refraction failure in steel up to 0.8%, the letters кп, пс and сп stand for deoxidized steel (very mild steel) . The letter SP indicates tensile steel and SP, which is actually SP, indicates semi-soft steels or the same steel that is suitable for construction purposes. For more information on uses of steel ingots please visit our website.
Bulk production of steel ingots in 2021
Bulk production of steel ingots in 2021 is possible by our company and this product is also exported to European countries, which has a good price and has made it very popular, so you can find more information about steel ingots price at Visit our site.
You can contact us to buy and sell this product:
Sales consultant: Ms. Leila NematzadehWays of communication:
Phone number: 02147623014
Phone number: 04133660491
Phone number: 09120169267
WhatsApp Response (Skype): click