steel sheet bunnings are obtained by galvanizing black wire. In fact, it can be said that galvanizing is a process in which the wire becomes resistant to oxidation and rust and prepares the wire for use in any type of climate. High grade sheet steel Exporting Countries deliver this product to the real customer at a reasonable price, and Iran is one of these exporting countries. Therefore, you can refer to our site for more information.
The brief introduction to High grade sheet steel
Galvanized wire is a process in which oxide-free steel is placed in a molten tub on an immersed surface, resulting in a cohesive and protective coating of zinc metal. The coating contains alloy layers that help with corrosion resistance of the base metal. There are two ways to protect against corrosion of the base metal. One is protection against atmospheric air and the other is the cathodic protection of zinc metal due to the electronegativity of zinc metal compared to iron or steel.
In cold galvanizing production method, zinc metal sits on the wire with electrolysis electroplating system. As a result, the thickness of zinc is low and it is not very resistant to moisture. In the hot type, the thickness of zinc is greater and as a result, it rusts later. In the cold galvanizing method, after cleaning and deoxidation of black wire, a layer is placed on it by applying electric current and electrolysis process. This building layer is a cold galvanized layer which is much thinner compared to the hot method. This process not only makes the wire resistant to moisture and breakage, but also makes it flexible.
This is done to prevent corrosion of the base metal, ie steel and its rust. Cold galvanized wire is usually produced with a diameter of 0.5 to 6 mm in two forms of coils and branches and their chemical composition and mechanical properties are a function of the rebar from which it is produced. Due to the fact that black wire is used in the production of galvanized wire, so it is very soft and its percentage of longitudinal increase as well as its resistance to bending and torsion increases. Hot-dip galvanized wire is also called white wire. It is a type of galvanized wire that is heated and coated through hot galvanizing.
Hot-dip galvanized wire is actually a heated or annealed black wire whose crane has been reduced to a minimum, is very soft and permeable due to heat. It is then coated in a completely deep and beautiful way by immersion in a molten bath. Having a smooth and uniform surface and high softness is a unique feature of this product. Its high bending and twisting ability causes it to be used in woven products such as fence nets, gabions, barbed wire, poultry nets, etc.
Exporting Countries for High grade sheet steel
Iran is one of the Exporting Countries for High grade sheet steel and this product is delivered to the customer at a good price. Therefore, you can visit our site for more information about stainless steel sheet.
You can contact us to buy and sell this product:
Sales consultant: Ms. Leila NematzadehWays of communication:
Phone number: 02147623014
Phone number: 04133660491
Phone number: 09120169267
WhatsApp Response (Skype): click