buy sponge iron vs scrap

Buy sponge iron vs scrap as the two main charging products for arc furnaces and induction furnaces, which are often used in proportions of 70 to 30 or even in some cases with different proportions.

What you read in this article:

The buy sponge iron vs scrap, the two main sources of arc and induction furnace charging, is for melting and ingot production by factories equipped with these furnaces.

Buy Iron scrap

Iron scrap is recycled through melting, recycled and used in the steel industry chain. Due to the high purity of Fe in Iron scrap, the production efficiency is high for melting if this product is used. Therefore, even factories that charge the input of their smelting line are 100 percent iron scrap.

But the point is, the scrap is scarce. In addition to scrap iron scarcity, its cost is another issue. This issue sometimes drops the profits of steelmakers and makes activities unjustifiable. For this reason, steelmakers, in combination with iron scrap, use iron ore minerals. But as you know, iron ore as well as iron ore pellets are not suitable for arc furnaces and iron ore. Because of the high percentage of impurities present in them. Sponge Iron is a product that is intermediate between the mine and the steel chain. For factories equipped with electric arc furnaces and induction furnaces.

Buy sponge iron

Sponge iron is developed for use in combination with scrap iron from 30 to 70. This ratio varies depending on the quality control of each plant. Fortunately, the increase of direct reduction units that are engaged in the production of sponge iron, nowadays the use of sponge iron is common for factories that work with arc furnaces and induction furnaces in our country ie Iran.