Cooled rolled steel Distribution centers

Cold rolling is often used to produce plates and belts with surface quality and dimensional accuracy. Also, this forming process is used to increase the strength of the plate through mechanical work. Therefore, our valued customers, you can apply to the Cooled rolled steel Distribution centers of our collection to purchase and purchase this product.

What is cold rolled steel used for?

Plates produced by hot rolling of minimum thickness are made on them after deformation by acid washing, thickness reduction or cold rolling processes . For this reason, it can be said that the cold rolling application is to reduce the thickness with the desired dimensional accuracy of steel sheets and at the same time to eliminate the pour point . But what is the pour point ? The pour point causes inhomogeneous deformation conditions in the forming process, especially the deep draw, which is important to remove, and doing some mechanical work by rolling, which is called annealing rolling, eliminates the point.

Another application of cold rolling is to flatten the roll containing two sets of small diameter rolls so that the roll formed in the previous process eliminates the curvature of the sheet and leaves the roll smoothly . In fact, the purpose of cold rolling is to reduce plate thickness under very high pressure, which is usually done at room temperature and up to 200 degrees Celsius . Cold rolling is a process used to produce plates and bands with surface quality and dimensional precision and to increase the strength of the plate .

These plates, produced by hot rolling with the lowest thickness and OD, reduce the thickness after works such as acid washing. Generally, it can be said that cold rolling reduces and eliminates the thickness with the desired dimensional accuracy of steel sheets . The yield point causes inhomogeneous deformation conditions in the process of forming and deep stretching the sheets and belts, and its removal is important, and doing a few mechanical work called re-rolling by rolling eliminates the point. In general, it can be said that the purpose of this cold rolling process is to reduce the slab thickness under high pressure by means of a roll with two sets of small diameter rolls, made at a maximum temperature. For more information on cold rolled steel prices, visit our site.

Distribution centers of Cooled rolled steel

Our company is one of the Distribution centers of Cooled rolled steel and distributes this versatile product at a reasonable price throughout the country. Therefore, for more information about cold rolled steel properties, you can visit our site.