High grade Cooled rolled steel to export

If the strength and tensile properties of the steel rod are increased, its flexibility is reduced. If the cold is reduced to the functional strength of the rods, it increases faster than the tensile strength, which also increases the strength. For more information about High grade Cooled rolled steel to export, Visit our site.

Will cold rolled steel rust?

Hot rolled steel bars are made at high temperatures, so the surface has a hard abrasive scale composed of various iron oxides. To cool the rods, the cold blades perform the splitting process by blasting or acid pickling. Cold Drawn bars, on the other hand, typically have 50 microchips and a maximum of modern equipment typically running 25-30 inches. The first part is the rolling of the cast pipe where certain sizes of steel ingots are produced. Then, in preheating furnaces, these ingots are heated gently to reach a uniform temperature. This uniformity greatly reduces the force and torque required for rolling.

Then the hot rolling phase begins. In this part of the hot rolling, ingots are transformed into slabs by heavy hot rolling and large reductions in cross-section. The board formed in the previous section is then converted into boards with a maximum thickness of 6 mm. At this stage, if the sheets do not require cold rolling and increase the surface quality, they are cut with shears after this stage. Otherwise, they are screwed into the cold rolling line. Sheet obtained from hot rolling enters the acid washing stage to prepare for cold rolling and stripping to improve surface quality and reduce roll wear.

After the acid washing step, the desired steel, known as roll, enters the cold rolling line to increase the surface quality, reduce its thickness and achieve the desired mechanical properties, resulting in coils of less thickness and higher precision, and or it is galvanized and oiled sheet. deformation occurs at a temperature below the recrystallization temperature.

In order to increase the mechanical properties of the metal and to obtain a more uniform product after cold rolling, heat treatment is performed on the coil since various processes are performed on galvanized and oiled sheets. Layers with a thickness of more than 0.5 mm are then placed on the tempera of the sofa to remove unwanted deformations and create a smooth layer. For more information on types of cold rolled steel visit our site.

Exporting High grade Cooled rolled steel

Exporting High grade Cooled rolled steel is done by our collection to all over the country and European and Asian countries. This product has high quality and has attracted good foreign customers. Therefore, for more information about cold rolled steel properties, you can visit our site.